Pay with PayPal

        Australia's only authorised dealer for Typical Sewing Machines. Est: 1968.





 
  Camsew sewing machine Cheltenham

                   

TYPICAL GC0605F Compound Feed, Side Load Bobbin, Climbing Device, and Ho Hsing G60 Servo.

TYPICAL GC0605F-D2T3 Compound Feed, Thread Trim, Auto. Foot Lift, Side Load Bobbin, Climbing Device, and Ho Hsing Fully Automatic



Available fully automatic GC0605F-D2T3
High torque Ho Hosing G60 servo drive motor, delivers power (750 Watts), and excellent control at low speed. Top Speed adjustable to 2000 RPM.
Needle Positioning
Climbing device to adjust climbing height of feet.
9mm, stitch length, Safety clutch to prevent damage from thrad lock.
Built in bobbin winder, and  simi automatic lubrication.
Takes standard  compound feed feet
Typical GC0605F $2,200.00 + GST.
TYPICAL GC0605F-D2T3 $3,500.00 + GST


Prices are a guide only, and subject to change.
No Hidden Costs

In Melbourne and surrounding areas

p
rice includes delivery, set up, with 12 months on site warranty parts and labour.

IF YOU ARE ABLE TO PICKUP FROM OUR MELBOURNE WAREHOUSE IN CHELTENHAM THEN YOU CAN SAVE $110.00 OF THE GST INCLUSIVE PRICE.

SAVE AN ADDITIONAL $110.00 IF YOU ASSEMBLE THE TABLE AND FIT THE MACHINE, FULL INSTRUCTIONS PROVIDED.

$AVE A TOTAL OF $220.00 OF THE GST INCLUSIVE PRICE.

In Sydney, Gold Coast, Adelaide, Brisbane.

price includes delivery by local mechanic, set up, with 12 months on site warranty parts and labour.

Freight by TNT could apply from Melbourne to your area.

IN ALL CASES THE MACHINE IS CHECKED AND STITCHED OFF.

ALL OTHER AREAS NOT LISTED ABOVE GET A $110.00 DISCOUNT TOWARDS THE FREIGHT.

 12 months return to point of purchase for warranty claims.

Compound Feed Walking Foot
Safety Clutch
Climbing Device
 
 
Built in bobbin winder Bobbin case and large bobbin 25X11mm Stitch Length to 9mm

Options

Piping Feet sizes 1/8" to 1", Half foot for zips etc. Top stitch foot.

Bench mounted led light. Australian made bench top.

Swing out binder, to take all sizes of shell binders.

Model  Drive Thread
Size 
Stitch Thread
Trim
Stitch Length Large Bobbin Feeding RPM Foot Lift   Climbing
device
Safety Clutch  Work Area Needle Made in  Price+GST 
GC0605NA Servo
By Belt
M20 Lockstitch   0-9mm Large
25X11mm
Compound
Feed
Walking
Foot
2,000 16mm      27X13cm 135x17
DPX17
China  $2,200.00
GC0605F-D2T3 Automatic $3,500.00
Motor Model Type Needle Positioning Volts Output Power HP RPM Made In Price
Ho Hsing G60 Servo Yes 180-284 750 Watts 0.7HP 2000 Taiwan Included
Back...
Automatic Model  Thread Trim Back Tack 2 Start/Finish Back Tack 4
Start/Finish
Max. Tack
Stitches

Programmable

Turn on/off
Trim

6 Bar Tack
Reverse
Switch
Change Needle
up/Down
Ho Hsing
GC0605F-D2T3