SEW UNIQUELY
TYPICAL TW1-999-D2T5 Long Arm 14 inch 35.5cm arm Single Needle, Top load large bobbin 32X12mm.
TYPICAL TW1-898-D2T5 Long Arm 14 inch 35.5cm arm Single
Needle. Top load large bobbin 26X12mm. TYPICAL TW2-898-D2T5 Long Arm 14 inch 35.5cm arm Twin Needle. Top load large bobbin 26X12mm. TYPICAL TW1-999-D2T5 Long Arm 14 inch 35.5cm arm Single Needle. Top load large bobbin 32X12mm. TYPICAL TW2-999-D2T5 Long Arm 14 inch 35.5cm arm Twin Needle. Top load large bobbin 32X12mm. Clearance under arm 355X120mm. Specifications for the each model... Direct Drive, Auto. Lube., Auto. Trim, Auto. Foot Lift, Electronic Hand Wheel, Switchable second stitch length. Switchable second foot height. Sub. Control bar for easy access, Led light. |
||
TYPICAL TW1-898/999-D2T5
Fully Automatic. Single and Twin Needle. Auto Thread Trim, Auto Foot Lift, Auto Back Tack Full Featured Control Panel. Price on Application. |
||
< Full Featured Panel. See Specifications for the control panel... |
||
Most Used features Easley Accessed on front of Operator. 1: Easy Reverse.2: By knee price change foot lift for cross seam.
3: Cancel back stitch
settings. 4: Changes needle to opposite stop position.
5:
By knee press
Increases
or decrease stitch length. 7: Electronic Hand Wheel. Manual precise needle position. |
|
|
Go from small
to large stitch, large to small at flick of a button. > with 2 stitch length dials. > |
||
< Built in bobbin winder with trim knife, and easy wind. | ||
Quick and easy
adjustment of foot lift for cross seams. > Go from low to high foot lift, high to low via the Knee Press > with 2 Height Settings. > |
Automatic Model | Thread Trim | Back Tack 2 Start | Back Tack 2 Finish |
Back Tack 4 Start |
Back Tack 4 Finish |
Max. Tack Stitches |
Programmable |
Turn on/off Trim |
6 Bar Tack |
Reverse Switch |
Change Needle up/Down |
Ho Hsing |
Model |
Stitch |
Drive |
Needle Positioning |
Stitch Length | Bobbin | Feeding |
TOP RPM |
Foot Lift | Lubrication |
Clearance Under Arm |
Needle | Thread | Price+GST |
TW1-898L14D2T55Single Needle | Lock Stitch |
Direct Servo |
0-99 mmm |
Large 26X12mmm | Compound Feed | 35000 | 16m Pneumatic | Auto | 355X120mmm | 135X177 (DPX17) |
Up
to M200 |
Price on Application | |
TW2-898L14D2T5TW2-898L14D2T5 Twin Needle | 2800 | ||||||||||||
TW1-999-D2T5 Single Needle | Large 32X12mm | 2800 |
$5,950.00 No Stock Price On Application |
||||||||||
TW2-999L14D2T5 Twin Needle | 2500 |
In Melbourne and surrounding areas.. Purchase, or more details....
IF YOU ARE ABLE TO PICKUP FROM OUR MELBOURNE BUSINESS IN RINGWOOD THEN YOU CANN SAVE $110.000OF THE GST INCLUSIVE PRICE..
SAVE AN ADDITIONAL $110.000 IF YOU ASSEMBLE THE TABLE AND FIT THE MACHINE, FULL INSTRUCTIONS PROVIDED..
$AVE A TOTAL OF $220.000OF THE GST INCLUSIVE PRICE..
Intrastate: Geelong, Bendigo, Ballarat. Interstate: Sydney, Gold Coast, Adelaide, Brisbane, Perth..
price includes delivery by local mechanic, set up, with 12 months on site warranty parts and labour.
Freight by carrier could apply from Melbourne to your area..
IN ALL CASES THE MACHINE IS CHECKED AND STITCHED OFF..
ALL OTHER AREAS.. Purchase, or more details....
ALL OTHER AREAS NOT LISTED ABOVE GET A $110.00 DISCOUNT TOWARDS THE FREIGHT..