GC20665L14-D2T4 Automatic Thread Trim and Reverse, Direct Drive Long Arm, Walking Foot
Compound Feed, Top Load Bobbin.
 |
|||||||||||||
| Integrated European design concept. | |||||||||||||
| High torque servo direct drive motor, delivers power (750 Watts), and excellent control at low speed (2500 RPM.) | |||||||||||||
| Led light, dimmable to suit operator needs. Handy quick reverse switch, and needle position. | |||||||||||||
| Electronic thread nipper to reduce bird's Nest at start. | |||||||||||||
| 9mm stitch length, with stitch length lock to provide stable stitch length. Short stitch to long stitch without touching stitch length dial. vice versa. | |||||||||||||
| Full featured control panel for automatic stitches. Plus sub control panel in easy reach, and knee press control for auto switching. | |||||||||||||
| Climbing device, auto switching to increase foot climb for cross seams. Second thread tension switches on for thick heavy material. | |||||||||||||
| Built in bobbin winder, and automatic lubrication. | |||||||||||||
| Throat size 360 mm x 103 mm. (The area to the right of the needle) | |||||||||||||
| Automatic foot lift included, available with electronic or pneumatic. | |||||||||||||
|
Typical GC20665L14-D2T4 $4,000.00 + GST. Prices are a guide only, and subject to change. |
|||||||||||||
|
No Hidden Costs Price includes delivery, set up, 12 months on site warranty parts and labour. In Melbourne and surrounding areas, Sydney, Canberra, Gold Coast, Adelaide, Brisbane. IF YOU ARE ABLE TO PICKUP FROM OUR MELBOURNE WAREHOUSE IN CHELTENHAM THEN YOU CAN SAVE $110.00 OF THE GST INCLUSIVE PRICE. SAVE AN ADDITIONAL $110.00 IF YOU ASSEMBLE THE TABLE AND FIT THE MACHINE, FULL INSTRUCTIONS PROVIDED. $AVE A TOTAL OF $220.00 OF THE GST INCLUSIVE PRICE. IN BOTH CASES WE CHECK AND STITCH OFF THE MACHINE. ALL OTHER AREAS NOT LISTED ABOVE GET A $110.00 DISCOUNT TOWARDS THE FREIGHT.
|
|||||||||||||
|
|||||||||||||
 |
 |
||||||||||||
| Model |
Thread Size |
Stitch | Stitch Length | Bobbin | Feeding | RPM | Foot Lift | Work Area |
Bed Dimensions |
Needle | Made In |
| GC20665KL14-D3T3 | M20 | Lockstitch | 0-9 mm | Large 25X11mm | Walking foot | 2500 | 16 mm Knee Press and Auto. |
360 X 103 cm | 135X17 | China |
| Motor | Type | Output Power | Amps | RPM | Made In |
| Typical | Servo |
750 Watts 0.75 HP |
0.3 | 2500 adjustable. | China |
Programmable
Automatic
Model
Thread Trim
Back Tack 2 Start
Back Tack 2
Finish
Back Tack 4
Start
Back Tack 4
Finish
Max. Tack
Stitches
Turn on/off
Trim
6 Bar Tack
Reverse
Switch
Change Needle
up/Down
GC0313AD3 and CX
YSC-8361
