SEW UNIQUELY
 |
TYPICAL GC20608-1HL18D Long Arm 18 inch 470mm arm Single
Needle. 1 X In Stock Discount Price single needle $2,950.00 + GST. TYPICAL GC20608HL18D Long Arm 18 inch 470mm arm Twin Needle. 1 X In Stock Discount Price single needle $3,400.00 + GST. Now Direct Drive with needle positioning. Single and Twin Needle. 6 Inch 150mm Height. Led light. Top load large bobbin 28X12mm. Automatic Oil Pump Lubrication. |
|||||||||||||
|
TYPICAL GC20608LH18D2T3 Fully Automatic. Single and Twin Needle. Auto Thread Trim, Auto Foot Lift (Pneumatic), Auto Back Tack Full Featured Control Panel Built-in. |
 |
|||||||||||||
| Built-in Bobbin winder. Takes standard compound feed feet. GC20606HL18 Twin Needle $4,300.00 Plus GST Complete 2 Needle available all gauge sizes. With Typical Direct Drive Servo. motor and needle positioning. Prices are a guide only subject to change without notice. SEAMS UNIQUELY Single Needle. GC20606-1HL18 Single Needle Plus GST Complete Single needle with Typical direct drive Servo motor. $4,200.00 Plus GST Complete. |
|
| Model | ||||||||||||
|
GC20608-1HL18D. GC20608HLD. |
Stitch |
Drive |
Needle Positioning |
Stitch Length | Bobbin | Feeding | RPM | Foot Lift | Lubrication | Needle | Thread | Price+GST |
| GC20606-1HL18 Single Needle. | Lock Stitch | Direct |
 |
0-9 mm |
Large 29X12mm | Compound Feed | 2000 | 13 mm Foot Pedal | Auto | 135X17 (DPX17) |
Up to M20 |
$3,400.00 |
| GC206086L18 Twin Needle. | $2,950.00 | |||||||||||
| Automatic Model | Thread Trim | Auto Foot Left. | Start & Finish Back Tack 1 to 4 |
Max. Tack Stitches |
Programmable |
Turn on/off Trim |
4 Bar Tack |
Slow Start |
Neat Stitch At Start |
Change Needle up/Down |
Auto Foot Lift |
Foot Lift &Trim |
Reverse Switch |
| GC20608HLD2T3 Twin Needle & Single Needle |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
In Melbourne and surrounding areas. Purchase, or more details...
price includes delivery, set up, with 12 months on site warranty parts and labour.IF YOU ARE ABLE TO PICKUP FROM OUR MELBOURNE BUSINESS IN RINGWOOD THEN YOU CAN SAVE $110.00 OF THE GST INCLUSIVE PRICE.
SAVE AN ADDITIONAL $110.00 IF YOU ASSEMBLE THE TABLE AND FIT THE MACHINE, FULL INSTRUCTIONS PROVIDED.
$AVE A TOTAL OF $220.00 OF THE GST INCLUSIVE PRICE.
Intrastate: Geelong, Bendigo, Ballarat. Interstate: Sydney, Gold Coast, Adelaide, Brisbane, Perth.
price includes delivery by local mechanic, set up, with 12 months on site warranty parts and labour.
Freight by carrier could apply from Melbourne to your area.
IN ALL CASES THE MACHINE IS CHECKED AND STITCHED OFF.
ALL OTHER AREAS. Purchase, or more details...
ALL OTHER AREAS NOT LISTED ABOVE GET A $110.00 DISCOUNT TOWARDS THE FREIGHT.