SEW UNIQUELY
Typical GC0617D Walking Foot Compound Feed, Direct Drive, Side Load Bobbin, Auto Lube.
Unsolicited Feed Back reproduced with permission.
Linda of Kinglake Vic. had this to say "The machine is fabulous, so much
more easier to use than my old machine" 14-04-2016
Options
GC0617D Now with new control panel not shown.
Set top speed, Slow start,
Reverse needle stop position, 15 Settings options.
High torque servo direct drive motor, delivers power (750
Watts), and excellent control at low speed. Top Speed
adjustable to 2000 RPM.
Available with synchronised binder $550.00 + GST extra with
one shell binder to suit.
Needle Positioning.
8mm, stitch length, with stitch length lock to
provide stable stitch length.
Built in bobbin winder, and
automatic lubrication.
Takes standard compound feed feet
SEAMS UNIQUELY
.
Prices are a guide only, and
subject to change.
Walking Foot
New Control Panel.
Set top speed, Slow
start, Reverse needle stop position,
15 Settings options.
Automatic Lubrication.
Built in bobbin winder
Bobbin case and large
bobbin 25X11mm
Stitch Length to 8mm
with locking device
Piping Feet sizes 1/8" to 1", Half foot for zips etc. Top stitch foot.
Bench mounted led light. Australian made bench top.
Synchronised swing out binder $550.00 + GST, With one shell binder to suit.
| Model | Drive |
Thread Size |
Stitch | Stitch Length | Large Bobbin | Feeding | RPM | Foot Lift | Work Area | Needle | Made in |
| GC0617D |
Servo Direct |
M20 | Lockstitch | 0-8mm | Large 25X11mm |
Walking Foot Compound Feed |
1,800 | 15mm | 27X13cm | 135x17 DPX17 |
China |
| Motor | Make | Type | Needle Positioning | Volts | Output Power | HP | RPM | Made In | GST |
| GC0617D | Typical | Servo | Yes | 180-284 | 750 Watts | 0.75HP | 1800 | China | Included |